Step by Step Setting Cabs using Riveting and How to Make these Mixed Metal Earrings !

I made these earrings recently and it was only when I finished that I thought what a good step by step tutorial they’d make.

handmade silver riveted labradorite earrings

Riveting sterling silver & labradorite earrings – £28

Unfortunately I hadn’t taken any photos so I made different pair in a similar way and photoed each stage.

Handmade riveted mixed metal earrings step by step how to make tutorial

Copper & Silver Riveted Earrings Hanging on my Handmade Wild Garden Straights Ear Wires

tutorial earrings

Step 1 – Cut 2 pairs of triangles our of 0.3mm copper sheet (when the earrings are riveted 2 x 0.3mm = 0.6mm a nice weight/strength for earrings

how to make riveted earrings

Step 2 – 2 discs cut from textured sterling silver sheet = also 0.3mm thick

domed silver discs

Step 3 – Silver discs domed using a metal doming black

Step 4 - holes (a little smaller than diameter of domed discs)  punched in copper triangles.

Step 4 – holes (a little smaller than diameter of domed discs) punched in copper triangles.

mighty punch

Mighty Punch – This was what I used to make the holes.

Step 5 - Pick a hole in the doming block that is slightly larger than the hole in the triangle.  Use a punch to gently flare the hole outwards

Step 5 – Pick a hole in the doming block that is slightly larger than the hole in the triangle. Use a punch to gently flare the hole outwards

step by step mixed metal earrings handmade

Step 6 – Check the silver domes fit the triangles.

Step 7 - Drill 1mm holes for the 1mm rivets

Step 7 – Drill 1mm holes for the 1mm rivets

Step 8 - Handmade fine silver balled end rivets (these could have been made out of sterling silver)

Step 8 – Handmade fine silver balled end rivets (these could have been made out of sterling silver)

riveted earrings tutorial

Step 9 – Put the earrings together remembering to include the domed silver discs – put the silver rivets through the earrings front to back

Earrings ready to be riveted - I added an additional wire rivet near the top. - They are then ready to sand down the edges and add the ear wires.

Earrings ready to be riveted – I added an additional wire rivet near the top. – They are then ready to sand down the edges and add the ear wires.

handmade sterling silver ear wires unique

Wild Garden Straights – handmade silver ear wires – £4 per pair

Handmade riveted mixed metal earrings step by step how to make tutorial

Copper & Silver Riveted Earrings Hanging on my Handmade Wild Garden Straights Ear Wires

handmade silver riveted labradorite earrings

These earrings were made in a  very similar way, I punched the hole for the labradorite cab through both pieces of silver to allow the light to shine through and I riveted a bail on the top.

You can use this technique for semi-precious cabs, round fused glass cabs and domed discs.

Learning how to rivet gives you lots of options in your jewellery making – have a look here for more examples – Riveting Workshop or see more riveted jewellery made by our students on our FB page

Just a Little Bit of Snow This Year – So Far…..

For those of you who missed my snowy pictures on FB – Here are a few of the photos I have taken in our lane whilst walking Choo Choo

LaVidalerieSign

Our lane

Our lane

lunet

This is our closest village – Lunet

And these two photos I’m planning to etch into rings – I’ll post photos when I find the time to do this 😉

snow

Ivy

And Finally… Choo Choo

lhassa apso - snowball legs

Choo Choo after his walk – His legs have turned into snowballs !

Do visit our website and see all the lovely new items by clicking here

And learn more about our fabulous jewellery making holidays by clicking here

Quick GiveAway – UPDATE 1.3.15 – Congratulations to Caroline J – Winner !

Add a comment with the name of our closest village to be included in the draw for a pair of my new handmade silver crescent moons – winner can choose hammered or sanded finish – Draw ends Sunday midnight 15th Feb 2015 (don’t worry if your comment doesn’t appear – they won’t until after midnight on Sunday)

artisan silver findings crescent moons handmade

Handmade silver crescent moons – Sanded finish – £5.50 a pair

handmade silver findings

Hammered Moons – £5.50 a pair

Advertisements

7 responses to “Step by Step Setting Cabs using Riveting and How to Make these Mixed Metal Earrings !

  1. the village is Lunet
    I just love the crescent earrings, either hammered or sanded!! The, like all your items, are just delightful.
    Thanks Rxx

  2. Hi Karen & Tim!
    Your nearest village is Lunet to which I’m trying to plan a return. Should I win, I’d love a pair of hammered half moon earrings please.
    Kathy xx

  3. Lunet is nearest village. It looks gorgeous there, but perhaps without snow. I don’t do snow

  4. Answer is Lunet! Great tutorial, gorgeous pictures of the landscape and I definitely need some hammered moon earrings in my life!
    Thanks Karen
    Gillian x

  5. You live near Lunet. While I tend to go for hammered These look marginally better with the sanded finish.

  6. Answer: Lunet
    Sanded finish would be lovely thanks!
    Fab tutorial with clear pics.
    Caroline x

  7. Catherine Perryman

    Lunet, wonderful name for a village, and also the shape of your latest earrings, please include me in your draw Catherine Perrymanx

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s